116x Firmware a BIOS update - 40. a 41. týden
Je tu další týden a my Vám přinášíme nové Firmware optických mechanik firem: AOpen (4×), Liteon (4×), MSI (1x), Sony (1×), Samsung (2×) a BIOSy pro základní desky: Abit (4×), Albatron (1×), AOpen (8×), ASRock (2×), Asus (5×), Biostar (6×), ECS (10×), EPoX (11×), Gigabyte (6×), Intel (18×), Jetway (6×), Magic-Pro (2×), MSI (7×), Shuttle (13×), Supermicro (2×), Tyan (3×).
Předem bych se chtěl omluvit za případné nefunkční odkazy, ale není v mých silách vše zkontrolovat. Pokud objevíte nějaký nefunkční link, napište mi o tom prosím do diskuze pod článkem, pokusím se ho opravit.
Ještě bych vás chtěl poprosit, aby jste po mě v diskuzi pod článkem nepožadovali firmware konkrétních výrobců a typů optických mechanik. Budou zde vždy pouze všechny, které výrobci uvolnili minulý týden. Pokud mi nějaký nový firmware unikl, budu samozřejmě rád, když mě na to upozorníte...
- 1558-JL
- New firmware to improve the media coverage.
- 1559-AS
- New firmware to improve the media coverage.
- 1550-C
- New firmware to improve the media coverage.
- 1500-C
- New firmware to improve the media coverage.
- SOHC-5236V Firmware version CO52R$0A
- Match more media
- SOHC-5235K Firmware version CO52LK06
- Match more media
- SHW-1635S Firmware version DR16YS0G
- Match more media
- SOHW-1693S Firmware version DR16KS0B
- Match more media
- X52-B Firmware version X52-Bv1
- Enhance CD-R/RW media compatibility to support more discs on market.
- Upgrade this firmware to support MSI Live Update firmware function
- SE-W164C Firmware version TS10
- unble to copy with CD-R blue disc
- System Hang-Up during runnig MagicSpeed.
- SH-W162C Firmware version TS10
- unble to copy with CD-R blue disc
- System Hang-Up during runnig MagicSpeed.
- DRU-720A | DRX-720UL | DRX-720UL/T Firmware version JY07
- Writing performance and reliability improvements.
Zdroj / Source: Optical drives manufacturer’s websites, Station Drivers
Ještě bych vás chtěl poprosit, aby jste po mě v diskuzi pod článkem nepožadovali BIOSy konkrétních výrobců a typů základních desek. Budou zde vždy pouze všechny BIOSy, které výrobci uvolnili minulý týden. Pokud mi nějaký nový BIOS unikl, budu samozřejmě rád, když mě na to upozorníte...
VGA - Grafické karty
(jak updatovat BIOS)
- KN8 SLI BIOS version 1.3
- Update nVIDIA RAID BIOS to V5.5
- Fixed the issue that the external clock cannot be set higher than 250MHz.
- KN8 BIOS version
- Update nVIDIA RAID BIOS to V5.5
- Fixed the issue that the external clock cannot be set higher than 250MHz.
- KN8 Ultra BIOS version 1.3
- Update nVIDIA RAID BIOS to V5.5
- Fixed the issue that the external clock cannot be set higher than 250MHz.
- NV8 BIOS version
- Update nVIDIA RAID BIOS to V5.5
- Fixed the issue that the external clock cannot be set higher than 250MHz.
(jak updatovat BIOS, návod v PDF)
- KM51PV BIOS version 1.00
- Initial.
- vK8T800a-LF
- Add to support AMD Turion 64 CPU.
- i865Gm-IL
4
- Add new CPU micro code.
F
ix the PXE boot error.
- i865Gm-7L
2
- Add new CPU micro code.
- Update AOpen Windows BIOS flash utility.T
- i865Gm-7N
2
- Add new CPU micro code.
- Update AOpen Windows BIOS flash utility.
- s661FXm-7S
6
- Add new CPU micro code.
- s661FXm-7
6
- Add new CPU micro code.
- i865Gm-7L
- CPU micro code update.
- i865Gm-7N
- CPU micro code update.
(jak updatovat BIOS)
- 775V88+
- Added cpu microcode F47/3 for Smithfield B-0 cpu F49/3 for Prescott G-1 cpu
- Added CPU microcode updated F4A for Prescott R0 stepping 662 cpu.
- K8S8X
- Support K8 754pin Semprom Rev.E CPU.
(ASUS Update 6.09.01
, jak updatovat BIOS)
Final
- P5GPL BIOS version 0507
- Support new CPUs. Please refer to our website at: http://support.asus.com.tw/cpusupport/cpusupport.aspx.2.
- Lower CPU fan lower speed warning threshold to 800RPM.
- P5GPL-X BIOS version 0402
- Support new CPUs. Please refer to our website at: http://support.asus.com.tw/cpusupport/cpusupport.aspx.
- P4V800D-X BIOS version 0202
- Support new CPUs. Please refer to our website at: http://www.asus.com.tw/support/cpusupport/cpusupport.aspx
Beta
- P4V800-X BIOS version 1009-06
- P4S800D-E-Deluxe BIOS version 1009-02
(jak updatovat BIOS)
- PT88P Pro-A7(PT88P-A7)
bootup Biostar splash screen
- Modify BIOS to correctly program the power LED
- P4M800-M7A(V1.0)
bootup Biostar splash screen
- Update BIOS to support CPU Smart FAN function.
- P4M800-M7A(V7.0)
bootup Biostar splash screen
- Update BIOS to support CPU Smart FAN function.
- K8M800-M7A
bootup Biostar splash screen
- Remove disabled option of shutdown temperature item
- K8T890-A9(K8T89-A9)
bootup Biostar splash screen
- Modify BIOS String to K8T890-A9
- NF325-A9
bootup Biostar splash screen
- Modify "DDR Power Down" function In order to Improve Memory Compatibility issue.
(jak updatovat BIOS - WinFlash, Award, AMI)
- A9S
- Support new OPN Rev:E4 and Rev:E6 CPU
- KN1 SLI Extreme(1.
0A)
BIOS version 1.0e- Support ADA3200DKACG, ADA3500DKACG, ADA3700DKACG, ADA4000DKACG CPU
- Support New Dual-Core 3800+ CPU
- Fixed CMOS check sum error twice when CMOS clear.
- Patch USB KB Lost Function Under APM Mode.
- Dual-Core CPU support.
- Support AMD version E6 CPU
- KN1 SLI Lite(1.0A) BIOS version 1.0c
- Support ADA3200DKACG, ADA3500DKACG, ADA3700DKACG, ADA4000DKACG CPU
- Support New Dual-Core 3800+ CPU.
- Dual-Core CPU support.
- NFORCE3-A939(1.0A) BIOS version 1.0A
- Support new OPN Rev:E4 and Rev:E6 CPU
- 649-M2(1.0B) BIOS version 1.0d
- Support 830/840 CPU
- Add New Flash ROM Support
- Improve N0 CPU S3/S1 more stable
- 945G-M3(1.0a) BIOS version 1.0g
- Update CPU Support 830/840 B-Step CPU
- Fixed SPDIF & AUX-In Function
- SPEC change add support AMT and SSX35A TPM function
- Update CPU Micro Code CPUID=0F61
- Support Smithfield XE CPU
- PA1 MVP(2.0) BIOS version 1.0A
- First release
- PF88 Extreme Hybrid(1.1) BIOS version 1.0c
- Support 830/840 CPU
- Add New Flash ROM Support
- Improve Memory More Stable
- A4S BIOS version 1.0a
- Support AMD K8 Rev:E6 ADA3000AIK4BX CPU
- NFORCE4-A939(1.0) BIOS version 1.0h
- Improve SATA HDD Raid function
- Fix Patch PCI device just need option resource cannot work.
- Support Dual Core 3800+ CPU
- Dual Core CPU Support
- Support Rev.E3 CPU.
(jak updatovat BIOS)
- EP-8HMMI-A BIOS version 05.10.11
- Solved sometime keyboard and mouse can't active.
- EP-8KDA3I V3.x BIOS version 05.10.04
- Solve X.5 ratio of CPU real clock show error.
- Support CPU ratio clock funcion can adjust X.5.
- Solve Martox G550 can't install driver.
- Update K8 Athlon 754 CPU Ver E6 for Cool'n'Quiet PST table.
- EP-9NPA+Ultra BIOS version 05.10.03
- Add CPU ratio X.5 support.
- USB KB still hot plug will hang up USB KB in COMS.
- EP-9NPAJ SLi BIOS version 05.10.06
- Add CPU ratio X.5 support.
- USB KB still hot plug will hang up USB KB in COMS.
- EP-8NPA7I BIOS version 05.10.03
- Add CPU ratio X.5 support.
- USB KB still hot plug will hang up USB KB in COMS.
- EP-8KDA3I BIOS version 05.10.04
- Solve X.5 ratio of CPU real clock show error.
- Support CPU ratio clock funcion can adjust X.5.
- Solve Martox G550 can't install driver.
- Update K8 Athlon 754 CPU Ver E6 for Cool'n'Quiet PST table.
- EP-9NPAJ BIOS version 05.10.03
- Add CPU ratio X.5 support.
- USB KB still hot plug will hang up USB KB in COMS.
- EP-9NPA3J BIOS version 05.10.03
- Add CPU ratio X.5 support.
- USB KB still hot plug will hang up USB KB in COMS.
- EP-8KDA7I BIOS version 05.10.04
- Solve X.5 ratio of CPU real clock show error.
- Support CPU ratio clock funcion can adjust X.5.
- Solve Martox G550 can't install driver.
- Update K8 Athlon 754 CPU Ver E6 for Cool'n'Quiet PST table.
- EP-8HDAI PRO BIOS version 05.10.13
- Solved sometime keyboard and mouse can't active.
- EP-9NPA+SLi BIOS version 05.10.06
- Add CPU ratio X.5 support.
- USB KB still hot plug will hang up USB KB in COMS.
(jak updatovat BIOS)
Final
- GA-K8NMF-9 BIOS version F6
- Update CPU code
- GA-K8NF-9 BIOS version F8
- Update CPU code
- GA-K8NE BIOS version F6
- Fix some motherboard boot fail when CMOS checksum fail
- GA-K8N51PVMT-9 BIOS version F1
- First Release
- GA-K8N51GMF-9 BIOS version F2
- Add an option in BIOS setup to disable onboard GPU if an external PEG exists
- GA-K8A480M-9 BIOS version F7
- Fixed system to re-detect USB device from S3 resumed
(jak updatovat BIOS - pomocí Intel Express nebo Iflash)
- D925XECV2 BIOS version 0469 Express | Iflash
- Added workaround for specific PCI card BSOD issue.
- Added new CPU microcode.
- Included fix for Japanese & Portuguese translations.
- BIOS enhancement for potential flash corruption.
- Fixed issue of “25X multiplier” is not supported on PSC CPU.
- Reduced S3 resume time by not double loading the CPU microcode
- Added workaround for certain LAN vendor to resolve LAN losing when system is shutdown
using power button override on. - Added "System in Manufacturing Mode" string in post screen during manufacturing mode per
DFX requirement. - Skip iflash if EMM386 is installed.
- Added support for DDR2 information that compliant to SMBIOS 2.4 spec.
- Fixed supervisor/user password problem where it was not support non-alphanumeric keyboard
characters.
- D925XEBC2 BIOS version 0469 Express | Iflash
- Added workaround for specific PCI card BSOD issue.
- Added new CPU microcode.
- Included fix for Japanese & Portuguese translations.
- BIOS enhancement for potential flash corruption.
- Fixed issue of “25X multiplier” is not supported on PSC CPU.
- Reduced S3 resume time by not double loading the CPU microcode
- Added workaround for certain LAN vendor to resolve LAN losing when system is shutdown
using power button override on. - Added "System in Manufacturing Mode" string in post screen during manufacturing mode per
DFX requirement. - Skip iflash if EMM386 is installed.
- Added support for DDR2 information that compliant to SMBIOS 2.4 spec.
- Fixed supervisor/user password problem where it was not support non-alphanumeric keyboard
characters.
- D925XCV BIOS version 0469 Express | Iflash
- Added workaround for specific PCI card BSOD issue.
- Added new CPU microcode.
- Included fix for Japanese & Portuguese translations.
- BIOS enhancement for potential flash corruption.
- Fixed issue of “25X multiplier” is not supported on PSC CPU.
- Reduced S3 resume time by not double loading the CPU microcode
- Added workaround for certain LAN vendor to resolve LAN losing when system is shutdown
using power button override on. - Added "System in Manufacturing Mode" string in post screen during manufacturing mode per
DFX requirement. - Skip iflash if EMM386 is installed.
- Added support for DDR2 information that compliant to SMBIOS 2.4 spec.
- Fixed supervisor/user password problem where it was not support non-alphanumeric keyboard
characters.
- D925XBC BIOS version 0469 Express | Iflash
- Added workaround for specific PCI card BSOD issue.
- Added new CPU microcode.
- Included fix for Japanese & Portuguese translations.
- BIOS enhancement for potential flash corruption.
- Fixed issue of “25X multiplier” is not supported on PSC CPU.
- Reduced S3 resume time by not double loading the CPU microcode
- Added workaround for certain LAN vendor to resolve LAN losing when system is shutdown
using power button override on. - Added "System in Manufacturing Mode" string in post screen during manufacturing mode per
DFX requirement. - Skip iflash if EMM386 is installed.
- Added support for DDR2 information that compliant to SMBIOS 2.4 spec.
- Fixed supervisor/user password problem where it was not support non-alphanumeric keyboard
characters.
- D915GVWB BIOS version 1319 Express | Iflash
- Updated 915G Video BIOS to Build 1239.
- Fixed the DVMT only allows 96MB of video memory in windows by updated MBI support
according to spec rev1.3.
- D915GMH BIOS version 1319 Express | Iflash
- Updated 915G Video BIOS to Build 1239.
- Fixed the DVMT only allows 96MB of video memory in windows by updated MBI support
according to spec rev1.3.
- D910GLDW BIOS version 1037 Express | Iflash
- Fixed hardware monitoring does not work after coming out of S3, by enable save/restore Heceta6
registers. - Set the POST code to 0x10 coming out of S1and set the POST code to 0x30 coming out of S3 to
conform to new DFX 1767 rules. - Disabled unused PCI Slot clock.
- Fixed hardware monitoring does not work after coming out of S3, by enable save/restore Heceta6
- D915PSY BIOS version 0039 Express | Iflash
- Improved S3 resume time by not double loading the CPU.
- Fixed issue where HT OSB logo not shown when system wake from
hibernation. - Set PCIe “Compliance Test Pattern” to enable for manufacturing
mode. - Added SMBIOS 2.4 spec support for PCIe and memory information.
- Added a workaround to fix an issue of losing Marvell LAN when
system is shutdown using power button override. - Grey out and disabled the option "PXE boot to Lan" when option "On
Board Lan" set to disabled. - Corrected badge placement when badge is displayed with BMP logo.
- Workaround destroy and recovery floppy issue.
- Fixed protected CMOS data being cleared in manufacturing mode.
- Added fixed which ship iflash when EMM386 installed to avoid fwh
corruption. - Fixed issue where some PCI Express cards were not detected during
POST. - Fixed WOL not functioning issue seen at boards with 1-watt circuit
stuffed. - Fixed issue where CD recovery failed on ICH6 RAID platforms.
- Fixed issue where recovery was failing from ATAPI devices (CD-ROM,
LS-120). - Fixed issue where the ITK Supplemental SMBIOS memory structure
(SMBIOS Type 0BBh) is not present on DDR1 systems. - Corrected the value programmed for TWTR per MRC 1.41.
- Update PCIe x16 Link Recovery Algorithm with Squelch Adjustment#1
and Squelch Adjustment#2 per 91x Express Chipset Family Bios spec
update rev 1.71/925X 925XE Express Chipset Bios spec update rev
1.92. - Fixed an issue where Power Button override when going into S3
caused system to hang on resume. - Fixed Enhanced Intel Speedstep® Technology (EIST) not able to step
down when using 3.0GHz CPU - Updated Portuguese translation.
- D915PGN BIOS version 0039 Express | Iflash
- Improved S3 resume time by not double loading the CPU.
- Fixed issue where HT OSB logo not shown when system wake from
hibernation. - Set PCIe “Compliance Test Pattern” to enable for manufacturing
mode. - Added SMBIOS 2.4 spec support for PCIe and memory information.
- Added a workaround to fix an issue of losing Marvell LAN when
system is shutdown using power button override. - Grey out and disabled the option "PXE boot to Lan" when option "On
Board Lan" set to disabled. - Corrected badge placement when badge is displayed with BMP logo.
- Workaround destroy and recovery floppy issue.
- Fixed protected CMOS data being cleared in manufacturing mode.
- Added fixed which ship iflash when EMM386 installed to avoid fwh
corruption. - Fixed issue where some PCI Express cards were not detected during
POST. - Fixed WOL not functioning issue seen at boards with 1-watt circuit
stuffed. - Fixed issue where CD recovery failed on ICH6 RAID platforms.
- Fixed issue where recovery was failing from ATAPI devices (CD-ROM,
LS-120). - Fixed issue where the ITK Supplemental SMBIOS memory structure
(SMBIOS Type 0BBh) is not present on DDR1 systems. - Corrected the value programmed for TWTR per MRC 1.41.
- Update PCIe x16 Link Recovery Algorithm with Squelch Adjustment#1
and Squelch Adjustment#2 per 91x Express Chipset Family Bios spec
update rev 1.71/925X 925XE Express Chipset Bios spec update rev
1.92. - Fixed an issue where Power Button override when going into S3
caused system to hang on resume. - Fixed Enhanced Intel Speedstep® Technology (EIST) not able to step
down when using 3.0GHz CPU - Updated Portuguese translation.
- D915PCY BIOS version 0039 Express | Iflash
- Improved S3 resume time by not double loading the CPU.
- Fixed issue where HT OSB logo not shown when system wake from
hibernation. - Set PCIe “Compliance Test Pattern” to enable for manufacturing
mode. - Added SMBIOS 2.4 spec support for PCIe and memory information.
- Added a workaround to fix an issue of losing Marvell LAN when
system is shutdown using power button override. - Grey out and disabled the option "PXE boot to Lan" when option "On
Board Lan" set to disabled. - Corrected badge placement when badge is displayed with BMP logo.
- Workaround destroy and recovery floppy issue.
- Fixed protected CMOS data being cleared in manufacturing mode.
- Added fixed which ship iflash when EMM386 installed to avoid fwh
corruption. - Fixed issue where some PCI Express cards were not detected during
POST. - Fixed WOL not functioning issue seen at boards with 1-watt circuit
stuffed. - Fixed issue where CD recovery failed on ICH6 RAID platforms.
- Fixed issue where recovery was failing from ATAPI devices (CD-ROM,
LS-120). - Fixed issue where the ITK Supplemental SMBIOS memory structure
(SMBIOS Type 0BBh) is not present on DDR1 systems. - Corrected the value programmed for TWTR per MRC 1.41.
- Update PCIe x16 Link Recovery Algorithm with Squelch Adjustment#1
and Squelch Adjustment#2 per 91x Express Chipset Family Bios spec
update rev 1.71/925X 925XE Express Chipset Bios spec update rev
1.92. - Fixed an issue where Power Button override when going into S3
caused system to hang on resume. - Fixed Enhanced Intel Speedstep® Technology (EIST) not able to step
down when using 3.0GHz CPU - Updated Portuguese translation.
- D915PCM BIOS version 0039 Express | Iflash
- Improved S3 resume time by not double loading the CPU.
- Fixed issue where HT OSB logo not shown when system wake from
hibernation. - Set PCIe “Compliance Test Pattern” to enable for manufacturing
mode. - Added SMBIOS 2.4 spec support for PCIe and memory information.
- Added a workaround to fix an issue of losing Marvell LAN when
system is shutdown using power button override. - Grey out and disabled the option "PXE boot to Lan" when option "On
Board Lan" set to disabled. - Corrected badge placement when badge is displayed with BMP logo.
- Workaround destroy and recovery floppy issue.
- Fixed protected CMOS data being cleared in manufacturing mode.
- Added fixed which ship iflash when EMM386 installed to avoid fwh
corruption. - Fixed issue where some PCI Express cards were not detected during
POST. - Fixed WOL not functioning issue seen at boards with 1-watt circuit
stuffed. - Fixed issue where CD recovery failed on ICH6 RAID platforms.
- Fixed issue where recovery was failing from ATAPI devices (CD-ROM,
LS-120). - Fixed issue where the ITK Supplemental SMBIOS memory structure
(SMBIOS Type 0BBh) is not present on DDR1 systems. - Corrected the value programmed for TWTR per MRC 1.41.
- Update PCIe x16 Link Recovery Algorithm with Squelch Adjustment#1
and Squelch Adjustment#2 per 91x Express Chipset Family Bios spec
update rev 1.71/925X 925XE Express Chipset Bios spec update rev
1.92. - Fixed an issue where Power Button override when going into S3
caused system to hang on resume. - Fixed Enhanced Intel Speedstep® Technology (EIST) not able to step
down when using 3.0GHz CPU - Updated Portuguese translation.
- D915PBL BIOS version 0039 Express | Iflash
- Improved S3 resume time by not double loading the CPU.
- Fixed issue where HT OSB logo not shown when system wake from
hibernation. - Set PCIe “Compliance Test Pattern” to enable for manufacturing
mode. - Added SMBIOS 2.4 spec support for PCIe and memory information.
- Added a workaround to fix an issue of losing Marvell LAN when
system is shutdown using power button override. - Grey out and disabled the option "PXE boot to Lan" when option "On
Board Lan" set to disabled. - Corrected badge placement when badge is displayed with BMP logo.
- Workaround destroy and recovery floppy issue.
- Fixed protected CMOS data being cleared in manufacturing mode.
- Added fixed which ship iflash when EMM386 installed to avoid fwh
corruption. - Fixed issue where some PCI Express cards were not detected during
POST. - Fixed WOL not functioning issue seen at boards with 1-watt circuit
stuffed. - Fixed issue where CD recovery failed on ICH6 RAID platforms.
- Fixed issue where recovery was failing from ATAPI devices (CD-ROM,
LS-120). - Fixed issue where the ITK Supplemental SMBIOS memory structure
(SMBIOS Type 0BBh) is not present on DDR1 systems. - Corrected the value programmed for TWTR per MRC 1.41.
- Update PCIe x16 Link Recovery Algorithm with Squelch Adjustment#1
and Squelch Adjustment#2 per 91x Express Chipset Family Bios spec
update rev 1.71/925X 925XE Express Chipset Bios spec update rev
1.92. - Fixed an issue where Power Button override when going into S3
caused system to hang on resume. - Fixed Enhanced Intel Speedstep® Technology (EIST) not able to step
down when using 3.0GHz CPU - Updated Portuguese translation.
- D915GEV BIOS version 0470 Express | Iflash
- Updated VBios 1239.
- Updated PCIe x16 Link Recovery Algorithm with Squelch Adjustment#1 and Squelch
Adjustment#2.
- D915GAG BIOS version 0470 Express | Iflash
- Updated VBios 1239.
- Updated PCIe x16 Link Recovery Algorithm with Squelch Adjustment#1 and Squelch
Adjustment#2.
- D915GAV BIOS version 0470 Express | Iflash
- Updated VBios 1239.
- Updated PCIe x16 Link Recovery Algorithm with Squelch Adjustment#1 and Squelch
Adjustment#2.
- D915GUX BIOS version 0470 Express | Iflash
- Updated VBios 1239.
- Updated PCIe x16 Link Recovery Algorithm with Squelch Adjustment#1 and Squelch
Adjustment#2.
- D845PEMY BIOS version P07 Express | Iflash
- Fixed the issue where supervisor and user password do not support non-alphanumeric
keyboard characters. User is adviced to clear password before update the BIOS. - Fixed issue when configure the BIOS with a Supervisor Password only and set the User
Access Level to No Access, all access to BIOS setup is lost. - Boot the system from IGD in manufacturing mode when there has on board graphic per
DFX requirement. - Added support for latest processors.
- Fixed the issue where supervisor and user password do not support non-alphanumeric
- D845GVFN BIOS version P07 Express | Iflash
- Fixed the issue where supervisor and user password do not support non-alphanumeric
keyboard characters. User is adviced to clear password before update the BIOS. - Fixed issue when configure the BIOS with a Supervisor Password only and set the User
Access Level to No Access, all access to BIOS setup is lost. - Boot the system from IGD in manufacturing mode when there has on board graphic per
DFX requirement. - Added support for latest processors.
- Fixed the issue where supervisor and user password do not support non-alphanumeric
(jak updatovat BIOS)
- 754GT-P-EC BIOS version A02
- Fix boot fail when use Creative X-Fi Sound card.
- K8M8MS BIOS version A13
- Support K8M800 & K8N800 auto detect.
- K8T8AS BIOS version A11
- Remove AMD logo for feature,AMD K8 REV:E6 support , RAID BOOT ROM update V4.90
- PM9MS BIOS version A03
- Modify BIOS for DRAM compatibility issue.
- 775GT4-SLI-K BIOS version A03
- Solution Creative Sound X-Fi card boot fail.
- 775GT4-SLI-G BIOS version A03
- Solution Creative Sound X-Fi card boot fail.
(jak updatovat BIOS)
- MP-K8N-3L BIOS version M02
- Add CPU micro codes.
- MP-K8VM-800 BIOS version M12
- Add CPU micro codes.
(jak updatovat BIOS - Award, AMI)
- RS482M BIOS version 1.4
- Update CPU ID for AMD E6 CPU.
- Enable "Resume by PCI Device(PME#)" function.
- 915GVM-V BIOS version 3.2
- Enable USB function.
- 915GLM-V BIOS version 3.2
- Enable USB function.
- 661FM3-V BIOS version 7.1
- BIOS reported incorrect CPU temperature for Prescott.
- Update CPU Microcode.
- 915P Neo2 Platinum BIOS version 1.8
- Update CPU Microcode.
- 915G Neo2 Platinum BIOS version 1.8
- Update CPU Microcode.
- 915PM-ILR BIOS version 5.6
- Hidden "PCI Express PME item".
- Support Hynix DDR 256M 400MHz HY5DU561622CT-5.
- SN95G5 V2 BIOS version 2005/10/11
- T
- SB95P V2 BIOS version 2005/10/11
- T
- SB61G2 V4 BIOS version 2005/10/11
- T
- ST20G5 BIOS version 2005/10/11
- T
- SB83G5C BIOS version 2005/10/11
- T
- SN95G5 V3 BIOS version 2005/10/11
- T
- SB83G5M BIOS version 2005/10/11
- T
- SB83G5 BIOS version 2005/10/11
- T
- SN95G5 BIOS version 2005/10/11
- T
- SS58G2SE BIOS version 2005/10/11
- T
- SD31P BIOS version 2005/10/11
- T
- SB77G5 BIOS version 2005/10/06
- T
- SD11G5 BIOS version 2005/10/06
- T
(jak updatovat BIOS)
- X6DVA-4G2 / X6DVA-EG2 BIOS version R1.0 zip
(jak updatovat BIOS)
Final
- Tomcat i875PF BIOS version 1.07
- Updated Celeron CPU micro coding
- Fixed an issue where the system will hang after entering setup and then saving and exiting the system while using a Prescott based 533MHz (FSB) CPU
- Tomcat K8E-SLI BIOS version 1.00
- This is the first release BIOS.
- Thunder K8WE BIOS version 1.02
- Updated nVida nForce SATA/RAID firmware to v5.53.07
Added RAID 5 support for the nVidia nForce SATA/RAID chipset - Resolve issues with nVidia MAC address all "FF"
- Improved Option ROM scanning order
- Resolved booting issues with some RAID cards
- Resolved booting issues with mixed nVRAID configurations
- Added IOMMU option
- Updated nVidia PXE to version 2.17
- Updated nVida nForce SATA/RAID firmware to v5.53.07
Zdroj / Source: Motherboard manufacturer’s websites, Station Drivers